User Manual

COMMUNICATION/DATA EXCHANGE
1.10 • 18.02.2011 73
9.4 Creating a New Connection
9.4.1 Ethernet Settings
This setting is not normally required as the internal Ethernet controller automatically
switches on as soon as an external current supply is connected to the skeye.pad
POS.
The internal controller can also be switched on or off using the "CFConfig" tool.
1. Double-tap the "CFConfig" symbol on the desktop.
The "CF-Slot Configuration" window opens.
Fig. 59: The "CF-Slot Configuration" window
2. Activate the checkbox "Enable internal Ethernet controller (LAN)" in the
"CF-Slot Configuration" window.
3. Close the "CF-Slot Configuration" window with [OK].
4. Select Start ⇒ Settings ⇒ Network and Dial-up Connections.
The "Network and Dial-up Connections" window appears.
Fig. 60: The "Network and Dial-up Connections" window
5. Double-tap the following symbol to configure the Ethernet connection.