User Manual

COMMUNICATION/DATA EXCHANGE
1.10 • 18.02.2011 67
3. Select "ActiveSync" under "Downloads" on this page and confirm your selection
with "Go".
4. Follow the instructions displayed to install ActiveSync.
5. Then restart your desktop PC.
6. After you restart the PC, the system displays the "Create connection" dialog
window, in which you are requested to create a connection with your skeye.pad
POS.
9.3 Receiving and Sending Data
9.3.1 skeye.pad POS – Desktop PC
We recommend the "ActiveSync" program for communicating with your PC
(Installing the Program, see Ch. 9.2).
1. Insert your skeye.pad POS in the connected desktop cradle.
2. Switch on your skeye.pad POS.
3. Switch on your desktop PC.
The connection is automatically established. The "Connecting to USB" window
opens.
Fig. 51: The "Connecting to USB" window
Once the connection to the desktop PC is established, the window is
automatically hidden and the "New Partnership" window appears (see next
page).
If no connection is established, check that the cable is correctly connected and
that the skeye.pad POS is correctly positioned in the desktop cradle and try
again.
If you are still unable to establish a connection, follow the steps described in Ch.
10.1.