User Manual

ADDITIONAL FUNCTIONS AND SETTINGS
1.10 • 18.02.2011 55
7.6 Setting the Date and Time
1. Choose Start ⇒ Settings ⇒ Control Panel.
The "Control Panel" menu opens.
2. In the "Control Panel" menu, select the "Date/Time" symbol
by double-tapping.
The "Date/Time Properties" window opens
Fig. 38: The "Date/Time Properties" window
3. In the "Date/Time Properties" window, set the following:
• The current date,
• the corresponding Time Zone and only then
• the Current Time
4. Select [Apply] to confirm your entries.
5. Close the "Date/Time Properties" window with [OK].