User Manual

ADDITIONAL FUNCTIONS AND SETTINGS
54 1.10 • 18.02.2011
3. Follow the same procedure for the crosses subsequently displayed.
After the last cross, the "Apply" inquiry window appears with a timer in the
calibration window.
4. Tap on the [Apply] button to confirm.
The calibration window is closed and the following inquiry appears:
Fig. 37: Inquiry "Touch calibration"
5. Confirm this inquiry with [OK].
The calibration settings are written into the flash memory.
The touch screen and its calibration may shift over time. If you notice that the touch
screen no longer reacts as precisely, execute the "Touch Calibration" function
again.