User Manual

HANDLING THE BATTERIES (POWER MANAGEMENT)
1.10 • 18.02.2011 49
6.1.5 Storing the skeye.pad POS with the Battery
To conserve the floating battery when not in use, the skeye.pad POS should
always be stored with a charged battery fitted!
Otherwise the power reserves in the floating battery will be consumed.
Discharged floating batteries must be replaced by qualified service personnel.
If the battery is removed or empty, the contents of the SRAM disk are powered by
the floating battery. This significantly reduces the service life of the floating battery.
An empty floating battery can cause the skeye.pad POS to malfunction. Discharged
floating batteries must be replaced by qualified service personnel.
The skeye.pad POS can be stored in "Complete Off" mode with a charged battery
for up to six months without maintenance.
The device can be stored with a charged battery in "Suspend" mode for up to three
weeks without maintenance. Depending on the battery status, the skeye.pad POS
then automatically switches to "Partially Off" or "Complete Off" mode.
If these storage periods are exceeded, power is drawn from the floating battery. A
charged battery must be used afterwards.
Storage should always be at room temperature (approx. 68 °F or 20°C).