User Manual

BATTERY CHARGER (OPTIONAL)
1.10 • 18.02.2011 45
5. Battery Charger (Optional)
5.1 Charging the Battery in the Battery Charger
The battery charger allows you to charge the lithium-ion battery separately. The
recess is molded in such a way that the battery can only be inserted correctly
(reverse polarity protection).
Fig. 30: Battery charger
The battery is inserted into the battery charger for charging.
Insert the battery in the battery charger in exactly the same way as in the skeye.pad
POS. Position the battery vertically in the area marked, with the rounded side facing
downwards. Fold the battery down and press it into place.
Charging the
Battery
• To charge a battery, insert into the powered battery charger.
• If the yellow LED lights up, the battery is correctly inserted in
the battery charger and is charged.
End of the
Charging
Procedure
• The green LED lights up to indicate that the battery is fully
charged again.
Charging
Time
• A completely discharged battery will take
approximately 2.5 to 3 hours to recharge. If the battery is not fully
discharged, the charging time is reduced accordingly.
Fold the battery upwards and lift it out of the battery charger.
Inserting
the
Battery
Removing
the
Battery