User Manual

MAINTENANCE AND SUPPORT
44 1.10 • 18.02.2011
4.10 Replacing the Cover
The cover is pushed in flush with the underside of the
skeye.pad POS. The cover has a recessed grip that allows you to push it in and pull
it out. If your device is equipped with wireless functions, this cover contains
components.
Fig. 29: Pushing in the cover
Carry out the following steps to replace the cover:
1. Press the yellow button to switch off the skeye.pad POS.
The display goes out and the skeye.pad POS switches to "Suspend Mode".
2. Remove the battery (see Ch. 4.6, Page 35).
3. Press the "Battery Eject Button" and pull out the cover from the skeye.pad POS
by applying light pressure to the recessed grip.
4. Press the cover into the skeye.pad POS until it is completely fitted and
encounters a natural resistance.
5. Insert the battery (see Ch. 4.7, Page 37).
6. Slide the battery lock to the right to the symbol .
The battery is now locked and you can switch on the skeye.pad POS.
7. Press the yellow button to switch on the skeye.pad POS.
The display lights up and the application starts.
Battery Eject
Button
Battery Lock