User Manual

USER INSTRUCTIONS
28 1.10 • 18.02.2011
3.7 Tearing Paper along the Paper Cutter
In order to reduce the weight of the skeye.pad POS, the printer was not fitted with
an automatic cutting device.
The paper is extremely robust, which is why it may rip if it is not torn off at the
correct angle.
Fig. 15: Tearing paper along the paper cutter; step 1
1. Grip the entire width of the upper edge of the paper.
2. You must tear off the paper evenly to the right at an angle of approx. 45°.
In this case, you can tear the paper from the bottom up or vice versa.
Fig. 16: Tearing paper along the paper cutter; step 2
3. When tearing off the paper, make sure that you pull the paper evenly
maintaining an angle of 45°.
Recommendation: If you are able to move the skeye.pad POS freely, turn the
skeye.pad POS so that the paper cutter lies horizontally to you and tear the paper
downwards.