User Manual

USER INSTRUCTIONS
1.10 • 18.02.2011 23
3.2 Switching Off the skeye.pad POS
3.2.1 Manually Switching Off
Fig. 9: Top view of the skeye.pad POS
1. Press the yellow button on the skeye.pad POS.
The display goes out and the skeye.pad POS switches to "Suspend Mode".
3.2.2 Automatic Switching Off
If left unused for longer than 2 minutes, the skeye.pad POS automatically switches
to "Suspend Mode".
You can increase this time (see Ch. 6.1.6) but this will affect the battery endurance.
Battery endurance is the time between 2 battery charges.
To maximize the endurance of the battery, the display can automatically switch off
through several levels. For this purpose, the skeye.pad POS switches to the
following states when left unused:
Level 1: The display is dimmed (Dim display) default: 15 s
Level 2: The display is switched off (Turn off display) default: 1 min
Level 3: The device switches to suspend mode default: 2 min
(Auto suspend)
The skeye.pad POS does not switch to suspend mode if it is executing program
processes, for example, when transmitting data or updating master data.
In addition to the suspend mode, the skeye.pad POS can be switched off to 2
further statuses using the "PowerOff" software function.
 Partially Off
 Complete Off
Yellow On/Off
Button