User Manual

USER INSTRUCTIONS
22 1.10 • 18.02.2011
Fig. 7: Rear view of the skeye.pad POS; correctly fitted battery
5. Slide the battery lock to the right to the symbol .
The battery is now locked and you can switch on the skeye.pad POS.
Fig. 8: Top view of the skeye.pad POS
6. Press the yellow button on the skeye.pad POS.
The display lights up and the application is started.
If you cannot start the skeye.pad POS, carry out a reset.
If the skeye.pad POS automatically switches to "Suspend Mode" due to an empty
battery, it cannot be switched on again.
However, the user still has time to replace the battery without losing any data. The
user receives several warnings in good time before this occurs.
If the battery is not replaced, the skeye.pad POS switches to the "Partially Off"
status before the battery is fully discharged. If the device is left in the "Partially Off"
status for more than 20 days, it switches to the "Complete Off" status to conserve
the floating battery.
The skeye.pad POS cannot be switched on using the yellow button when it is in the
"Complete Off" status. To do this, you must reset the skeye.pad POS.
Battery
Battery Lock
Yellow On/Off
Button
Switching on
the skeye.pad
POS