User Manual

USER INSTRUCTIONS
1.10 • 18.02.2011 21
3. User Instructions
3.1 Switching On the skeye.pad POS
Note that you can only switch on the skeye.pad POS after you have inserted a
charged battery and locked it in place!
Fig. 6: Rear view of skeye.pad POS with battery removed
1. Slide the battery lock to the left to the symbol .
2. Place a charged battery with the rounded side facing downwards in the area
marked (see Fig. 6) at an angle of approx. 45° or less.
3. Fold the battery downwards.
4. Press down slightly on the battery,
The battery is correctly fitted in the battery recess
(see the figure below).
Battery Lock
Battery
Recess
Surface for
Positioning the Battery
Inserting
the battery
Battery
Plug-type
Connection on
the Battery
Plug-type Battery
Connection