Operation Manual
3
c) Disconnect the plug from the power source and/or the battery pack form the power tool
before making any adjustments, changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting the power tool accidentally.
d) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts
and any other condition that may affect the power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents are caused by poorly maintained power tools.
e) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
f) Use the power tool, accessories and tool bits, etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed. Use of the power
tool for operations different from those intended could result in a hazardous situation.
Service
a) Have your power tool serviced by a qualified repair person using only identical replacement
parts. This will ensure that the safety of the power tool is maintained.
SAFETY WARNINGS FOR OPERATION
WARNING: Read all safety warnings and instructions. Failure to follow the
warnings and instructions may result in electric shock, fire, and/or other
serious injury. Save all warnings and instructions for future reference.
This tool is intended to be used as a WEED BURNER & BBQ LIGHTER. We advise against using this
item for any other applications.
a) A fire may arise if the tool is not used with care. Be careful when using the tool in places
where there are combustible materials. Do not apply to the same place for a long time. Do
not use in presence of an explosive atmosphere. Be aware that heat may be conducted to
combustible materials which are out of sight. Allow the tool to cool before storage. Do not
leave the tool unattended when in use.
b) Do not use the tool or touch the power plug with wet hands. Failure to observe this may
result in electric shocks.
c) Do not point the hot wind directly at people or animals. Do not look into the nozzle. Failure
to observe this may result in accidents or injury.
d) Check the tool for damage, cracks or malformation in the event of it being accidently dropped
or subject to impact. Damage, cracks and malformation may result in injury.
e) Cease operations immediately in the event of the tool not operating properly or if
abnormal noises or vibrations are noticed, and contact an Authorized Service Center to
request inspections and repairs. Continued use may result in injury.
f) Do not get away from the unit while it is switched on. Failure to observe this may result in
accidents.
g) If during use, electricity is interrupted, (e.g. the power plug came out, the breaker fell, a
blackout occurred) and the heat gun fan has stopped, please put the switch in OFF position.
If the switch is left in ON position when power resumes, the restart of the fan may cause
fire.