Assembly Instructions This instruction booklet contains important safety information, please read and keep for future reference. ITEM # HITC85-Q 3 piece Dinning Set 2 people 30 mins 1 YR LTD 2 Box Product Dimensions: TABLE Height 23” x Width 31” x Depth 36” CHAIR Height 15” x Width 16” x Depth 39” 1|Page www.Hodedah.
Questions, need parts, we are here to help! Phone Mon – Fri | 9:30 am to 5pm EST 1 - 855 – HODEDAH Email Send us an email Support@Hodedah.com Website Visit our website to open a case www.Hodedah.
Let’s get started… Helpful hints, read before beginning assembly Make sure you receive all boxes. If your item is packed in one box, box count will read 1 of 1, likewise if your item is packed in two boxes, box count will read 1 of 2 and second box will read 2 of 2. Read each step carefully. It is very important that each step is performed in the correct order. If these steps are not followed in sequence, assembly difficulties will occur.
Hardware List QTY A B 1 D 4 G 6 QTY C 2 E H 4 1 QTY 2 F I 4 24 J 2 K 2 L 2 M 2 N 2 O 8 P 8 Q 8 Important 1. Before you throw the package, please use the Check Box to identify the parts and hardware to ensure that you have everything you need. 2. Check and measure the bolts before applying them to parts. 3. Do not completely tighten all hardware until the entire assembly is complete, unless indicated otherwise. 4|Page www.Hodedah.
The Breakdown… 5|Page www.Hodedah.
Step 1 Please insert Brassbase (B) to leg (D) using the (H) allen key and the (I) screws, Do the same for Brassbase ©. Step 2 To complete the table assembly, Pls use screw (I) 6|Page www.Hodedah.
Step 3 C B Using screw (G) on the Brassbase (B) and (C) insert the screws.Total 8pc of screw (G) is to be used.(use a phillip star head screwdriver) Step 4 Place caps (F) on the bottom of each leg (D), Tap Lightly. 7|Page www.Hodedah.
Step 5 Please cross Bar (N) to the front of leg (L) insert screw (O) Then Place cross Bar (M) to the back of leg (L) using screw (O) to tighten please use allen key (Q) Step 6 Please complete leg (N,L ) on to the chair back (J) insert screws (I and E) 6 PC with the allen key (H) 8|Page www.Hodedah.
Step 7 Insert chair cushion (K) on to chair frame using screw (Q) 4PC.two on each side.(use a phillip star head screwdriver) Step 8 Insert caps (P) to the bottom of each chair.tap lightly 9|Page www.Hodedah.
Job Complete… Enjoy & Thank you for purchasing from Hodedah! 10 | P a g e www.Hodedah.
