sy HOTHEADED Fi www.hodedah.com SHEER, A IMPORTANT NOTE: « This product contains small components, please ensure that they are kept away from small children. » This instruction booklet contains IMPORTANT safety information. Please read and keep for future reference. * Note: you will find extra screws and bolts in hardware pack in case of any missing pieces. DO NOT RETURN PRODUCT TO THE STORE If a part is missing or damaged, email our customer service.
wi: HOTHEADED www.hodedah.com Thank you for purchasing from Hotheaded To learn more about hotheaded and our products visit www.hodedah.com READ BEFORE BEGINNING ASSEMBLY -Read each step carefully. It is very important that each step of instruction is performed in the correct order. If these steps are not followed in sequence, assembly difficulties will occur. -Make sure all parts are included. Most parts are labeled or stamped on the raw edge.
www.hodedah.com SEER Breakdown Structure Parts Hardware {0} Top board €3 Back board €} Top frame ¥ Screw G) Bolt 1un lun. 2un. 4 un. 4un. €00°400mm 460"240mm 480*110mm £5*50mm @5mm {} Table frame €3 caster 3 Flat Nut {3) Steel Washer 2un 4.un. 4un.
sy HOTHEADED www.hodedah.com Step 1 « Attach back board (2) to table frame (4) with screw (A) .
sy HOTHEADED www.hodedah.com STIR, Step 3 « Attach top frame (3) to top board (1) on both side after align right the holes with screw (B). (see photos for example) HARDWARE REQUIRED my 4B Step 4 « Attach top frame (3) to top board (1) on both side after align right the holes with bolt with steel washer (D) and nut (C).
a ak > www.hodedah.com SATORI Step 5 « Screw caster(5) on bottom of table frame (4). Job Complete ! In the interest of our environment please dispose of all packaging thoughtfully.
