HODEDAH ASSEMBLY INSTRUCTIONS METAL BED HI 599 TWIN 1
HODEDAH IMPORTANT NOTE : . This product contains small compenents, please ensure that they are kept away from small children. . This instruction booklet contains IMPORTANT safety information. Please read and keep for future reference. . Note : you will find extra screws and bolts in hardware pack in case of any missing pieces. . If the glass is chipped or broken, do not attempt to assemble the item. DO NOT RETURN PRODUCT TO THE STORE STOP If a part is missing or damaged, email our customer service.
HODEDAH Thank you for purchasing from Hodedah To learn more about Hodedah and our products visit www.hodedah.com READ BEFORE BEGINING ASSEMBLY - Read each step carefully. It is very important that each step of instruction is performed in the correct order. If these steps are not followed in sequence, assembly difficulties will occur. - Make sure all parts are included. Most parts are labeled or stamped on the raw edge. - Work in spaclous area, preferably on a carpet, near the placethe unit will be used.
HODEDAH Breakdown Structure 3 A A 2 A 5 A B 1 A B 7 B A B 7 6 B A B 8 6 8 A 4 A 7 5 A 2 2 A A 4
HODEDAH Parts 1 Head Post 2 Foot Post 2 un. 5 Center Rail 2 un. 6 Side Support Legs 2 un. 2 un. 3 Head Board 4 Foot Board 1 un. 7 Center Support Legs 1 un. 8 Bed Sheet 4 un. 2 un.
HODEDAH Step 3 Connect # 2 Foot Post to 4 Footboard using letter A screws from the inner FB to post using D Allen Key. 4 A A A A 2 D HARDWARE REQUIRED 4*A 1*D Step 4 Take # 8 Bed Sheet. Align it to 2 Post using A Screw and D Allen Key.
HODEDAH Step 1 Connect # 3 HB to # 1 Head Post by using letter A screws from inner Head Board to connect to 1 Post using D Allen Key. A A A A D HARDWARE REQUIRED 4*A 1*D Step 2 Take # 8 and align it to Head Post # 1 using A screws and D Allen Key.
HODEDAH Step 5 Take the Center Rail 5 insert under the 8 Bed Sheet then using the Qty of 4 Support legs 7 using Screw B and Allen Key D . 5 B B D 5 B B 7 7 HARDWARE REQUIRED 4*B 5 7 1*D Step 6 Take the Side Support Legs 6 . Place it on the Side of Bed Sheets 8 . Insert B Screws from top of Bed Sheet using D AllenKey and inrock C Nuts on the bottom.
HODEDAH Step 7 . Tighten all bolts with allen key (D) after making sure they are in the right position. Job Complete ! In the interest of our environment please disposeof all packaging thoughrfully.
