User Manual

FireNET FNP-LED I & O Manual v1.0 UL

AM4 CABINET, CHARCOAL EXPANSION BOARD POPULATION

FNP-LED-32-401 4 Red, 0 Green, 1 Yellow Expansion Board

FNP-LED-32-410 4 Red, 1 Green, 0 Yellow Expansion Board

FNP-LED-32-500 5 Red, 0 Green, 0 Yellow Expansion Board

Part Number Assignment Matrix

The following part number matrix describes the component structure of the FNP-LED:

Part Number Assignment Matrix For The FNP-LED Graphic Annunciator

FNP-LED-XX-YYY This is the number of 'YELLOW' LED expansion boards This is the

number of 'GREEN' LED expansion boards This is the number of 'RED' LED expansion boards This is the Color of the

cabinet This is the Size of the cabinet FNP-LED-XX-YYY Indicates the HOCHIKI Model Number

Option Ranges

Option Type Valid Entries Description

Cabinet Sizes

0 AM-2 Cabinet: 14.50” x 12.25” x 3.50”

2 AM-3 Cabinet: 14.50” x 18.90” x 4.25”

3 AM-4 Cabinet: 14.50” x 24.25” x 4.25”

Cabinet Color

1 Red cabinet

2 Charcoal cabinet

Expansion Boards

**NOTE**

The number of expansion boards that can be installed on an FNP-LED is

dependent on the cabinet size. The three "YYY" digits of part number FNP-

LED-XX-YYY identify the amount of expansion boards installed in a

cabinet. The amount of expansion boards installed cannot exceed the

capacity of cabinet sizes AM-2, AM-3 and AM-4. An expansion board is not

installed when all zeros (000) are present in the "YYY" digits of the FNP-

LED-XX-YYY part number. Any combination of LED colors can be used.

AM-2 1 expansion board.

AM-3 3 expansion boards.

AM-4 5 expansion boards.

firealarmresources.com