User Manual

FireNET FNP-LED I & O Manual v1.0 UL

Four 1/5" (5 mm) mounting screws

3.5 Connections

The FNP-LED requires 24VDC power and RS-485 data to operate. Connect the RS-485

data circuit to the COMMS terminals on the FireNET Plus control panel. 24VDC power

may be obtained from the AUX power on the FireNET Plus panel, or from a UL listed

24VDC auxiliary power supply. Be sure to observe proper polarity on the 24VDC power

and RS-485 circuit connections.

firealarmresources.com