Instruction Manual

Page 18 of 19 ESP FIREbeam – Installation Manual
 2011 Hochiki Europe (UK) Ltd
2-3-0-1340/ISS2/DEC11
3.3.5 Diagnostics
Press enter the ‘Diagnostics’ menu and access the sub menus.
IR Power
This screen shows the amount of output power that is being transmitted. It
can be increased or decreased by using the right and left keys.
Press
enter to return to ‘Diagnostics’ or down to go to ‘RX Sensitivity’.
RX Sensitivity
This screen shows the receiver sensitivity and can be changed by using the
right and left keys. Press enter to return to diagnostics or down to
go to ‘Temperature’.
Temperature
Here you can see the temperature at the beam head and the amount of
compensation being made for temperature (no adjustments can be made
here).
Press
enter to return to diagnostics.