Operation Manual

.EN.
11. Remote control and cleaning modes.
The activation of the e.ziclean® HOBOT robot’s cleaning mode is performed using the remote control.
Automatic cleaning from the Top to the Bottom.
Automatic cleaning from the Left to the Bottom.
Automatic cleaning from the Right to the Bottom.
Cross
Multi-directional
Manual control of the robot’s movements.
STOP. OK
These 2 buttons allow you to stop the robot.
Do not use on this version.
Information
To use the e.ziclean® HOBOT on a table or another flat surface, activate the most appropriate
cleaning mode in the same manner. Its void detection system will prevent the device from falling.