Operation Manual

- 5 - HOBOT Technology Inc.
Getting to know the device
 HOBOT-168 shall always connect power cable for normal using.
 How to put device onto glass to start using
(1) Turn on power-switch, and then make sure the fan is running.
(2) Put device onto glass and keep 10cm away from the window frame.
(3) Check if device can stick to the glass before releasing it.
 How to take device down from glass
(1) While device is running, please hold safety rope with one hand and take device
Upper hooking hole
DC power jack
Safety rope
Vent
Buzzer
Blue lamp: Normal
Red lamp: Abnormal
Orange lamp: charging
Green lamp: full-charged
Remote receiving window
Lower hooking hole
Power-switch