User Manual

HOBO
®
U12 Temp/RH/
2 External Data Logger
(Part # U12-013)
© 2009–2010 Onset Computer Corporation. Onset and HOBO are registered trademarks of Onset Computer Corporation. Other products and brand
names may be trademarks or registered trademarks of their respective owners.
Inside this package:
• HOBO U12 Temp/RH/
2 External Data Logger
• Mounting kit with magnet,
hook and loop tape, tie-wrap
mount, tie wrap, and two
screws.
Doc # 13129-B,
MAN-U12013-web
Onset Computer Corporation
Thank you for purchasing a
HOBO data logger. With proper
care, it will give you years of
accurate and reliable measurements.
The HOBO U12 Temperature/Relative Humidity/2
External Data Logger is a four-channel logger with 12-
bit resolution and can record up to 43,000
measurements or events. The two external analog
channels accept a wide range of Onset and third-party
sensors/transducers with a 0-2.5 VDC output, including
external temperature, AC current, pressure, air velocity,
and kW sensors. Specifications for Onset sensors can
be found at www.onsetcomp.com or by contacting your
Onset Authorized Dealer. For 0-5 VDC, 0-10 VDC, or
4-20mA output, use optional Onset Part No. CABLE-
ADAP5, CABLE-ADAP10, or CABLE-4-20mA
respectively.
The logger uses a direct USB interface for launching
and data readout by a computer. Onset software is
required for logger
operation. Visit
www.onsetcomp.com for
compatible software.
Specifications
Measurement
range
Temperature: -20° to 70°C (-4° to 158°F)
RH: 5% to 95% RH
External input channels (see sensor
manual): 0 to 2.5 VDC; 0 to 5 VDC (with
CABLE-ADAP5) and 0 to 10 VDC (with
CABLE-ADAP10)
Accuracy
Temperature: ± 0.35°C from 0° to 50°C (±
0.63°F from 32° to 122°F), see Plot A
RH: +/- 2.5% from 10% to 90% RH
(typical), to a maximum of +/- 3.5%. See
Plot B.
External input channels (see sensor
manual): ± 2 mV ± 2.5% of absolute
reading
Resolution
Temperature: 0.03°C at 25°C (0.05°F at
77°F), see Plot A
RH: 0.03% RH
External Input Channels: 0.6 mV
Drift Temperature: 0.1°C/year (0.2°F/year)
RH: <1% per year typical; RH hysteresis
1%
Response time
in airflow of 1
m/s (2.2 mph)
Temperature: 6 minutes, typical to 90%
RH: 1 minute, typical to 90%
Time accuracy
± 1 minute per month at 25°C (77°F),
see Plot C
Operating
temperature
Logging: -20° to 70°C (-4° to 158°F)
Launch/readout: 0° to 50°C (32° to 122°F),
per USB specification
Battery life 1 year typical use
Memory 64K bytes (43,000 12-bit measurements)
Weight 46 g (1.6 oz)
Dimensions 58 x 74 x 22 mm (2.3 x 2.9 x 0.9 inches)
The CE Marking identifies this product as
complying with all relevant directives in the
European Union (EU).
Plot A Plot B
Plot C
Connecting the Logger
The U-Family logger requires an Onset-supplied USB
interface cable to connect to the computer. If possible, avoid
connecting at temperatures below 0°C (32°F) or above 50°C
(122°F).
1. Plug the large end of the USB interface cable into a USB
port on the computer.