Application Guide

Quick Start for the
HOBO® U-Series Data Logger
Launching
1
Open HOBOware®
software (install first).
Using a new logger
model? Update to the
latest free software at:
www.onsetcomp.com/
hoboware-free-
download
2
Connect logger to
computer with USB
cable. Connect any
sensors to logger.
3
Open Launch Logger
window. Choose
settings. Click Start.
Device > Launch
4
Disconnect logger and
deploy it. Logging will
begin as determined
by settings in Step 3.
16125-C MAN-U-QSG
Reading Out
5
Connect logger to
computer and read it
out (or use a HOBO
U-Shuttle).
Device > Readout
6
Plot data from logger.
Print the plot, export
data, save it as a
project file, and more.
7
Relaunch and redeploy logger as needed.
For detailed specifications and
information about this logger,
scan the code or go to:
www.onsetcomp.com/support/manuals
© 2012–2016 Onset Computer Corporation. All rights reserved. Onset, HOBO, and HOBOware
are trademarks or registered trademarks of Onset Computer Corporation.
1-800-LOGGERS • 508-759-9500 • www.onsetcomp.com/support/contact