Instructions for use

2
HT-421900
Hex wrench complety set
Kit tournevis hexagonaux
(1,5-2-2,5-3mm)
RECOMMENDED TOOLS (NOT PROVIDED)
OUTILS NÉCESSAIRES (NON FOURNIS)
Silicon oil / Huile silicone
Check basic setup sheet for recommendation
Se reporter à la fiche de réglages basique
Tread lock / Frein filet
Follow assembly manual for recommendation
Suivre la notice pour l’utilisation
Tools / Outillage
Flat head screwdriver / 5mm Hex screwdriver / Knife edge reamer / 17mm wheel wrench /
Knife / Plier / (4.0 - 5.0 - 5.5 - 6.0 - 8.0mm) wrenches / Lexan scissors
Tournevis plat / Tournevis hexagonal 5mm / Alésoir à lexan / Clé à roue 17mm / Cutter /
Pince / Clés plates (4.0 - 5.0 - 5.5 - 6.0 - 8.0mm) / Ciseaux à lexan
Transmission grease / Graisse
Follow assembly manual for recommendation
Suivre la notice pour l’utilisation
ITEMS REQUIRED (NOT PROVIDED)
ÉQUIPEMENT NÉCESSAIRE (NON FOURNI)
1/8 Tires / Pneus 1/8ème
Recommendation : # HT-458
Combo 1/8 ESC + Motor / Combo moteur + contrôleur 1/8ème
Recommendation : # KN-COMBO-M8
150AMP ESC + 2000Kv motor
Motor pinion pitch 1mm
Pignon moteur module 1mm
Check page 15 / Se reporter à la page 15
Special R/C body paint
Peinture spéciale carrosserie lexan
LiPo battery / Batterie LiPo
Recommendation : # KN-LP4S5500
4S 5500mAh LiPo battery
Charger / Chargeur
Recommendation : # KN-MULTI80RS
80AMP balance charger/discharger
Steering servo / Servo de direction
Recommendation : # KN-3207HVBL
HV digital Brushless 32kg-0.07s servo
Transmitter & receiver / Émetteur & récepteur
Recommendation : # KN-KT2S-PLUS-SET
2 channels / 2 voies