Instructions for use
ENGLISHFRAN
Ç
AISDEUTSCHESPAÑ OL
11
PROGRAM THE ESC
1. Program Method
Note3: • In the program process, the motor will emit “Beep” tone at the same time when the LED is flashing.
• If the “N” is bigger than the number “5”, we use a long time flash and long “Beep---” tone to represent “5”, so it is
easy to identify the items of the big number.
For example, if the LED flashes as the following:
“A long time flash + a short time flash” (Motor sounds “Beep---Beep”) = the No. 6 item
“A long time flash + 2 short time flash” (Motor sounds “Beep---BeepBeep”) = the No. 7 item
“A long time flash + 3 short time flash” (Motor sounds “Beep---BeepBeepBeep”) = the No. 8 item …… And so on.
Programmable Items List
(Italic texts in the above form are the default settings)
1 2 3 4 5 6 7 8
1. Running Mode
Forward Only
with Brake
Forward/Reverse
with Brake
2. Drag Brake Force
3. Low Voltage
Cut-Off Threshold
Non-Protection 2.6V/Cell 2.8V/Cell
3.2V
/Cell
3.4V
/Cell
4. Start Mode (Punch) Level1 Level2 Level6 Level7 Level8 Level9
5. Max Brake Force 25%
9
Programmable
Items
Basic Items
Programmable Value
3.0V
/Cell
10% 20% 40% 60% 80% 100%
100% Disable
5%
Level4
Level3
75%
Level5
0%
50%