User Manual

Installing Camera:
For use with the X-GYRO, your camera needs to be mounted on a pan/tilt, and
that can be 2 R/C servos controlled.
Standard R/C servos will get about a 90° total throw, which is enough for the tilt
axis. However, it would be very useful if the pan servo can throw over a wider
range.
This can be done by hardware servo modification, but in order to easy the
challenge, we have developed the Servo Expansion module that can double the
movement command received from the TX once plugged between the receiver
and the servo.
This allows using the maximal throw the servo’s mechanical limits will accept,
usually around 180°. We recommend using it on the Pan axis