User Manual

Install X-GYRO
This module checks angular positions around 2 axis, just like showed on the
picture below, It’s very important to align them to your head’s rotation axes, so
that the measured movements are independently.
If it is not aligned properly, the sensor will report false information which is very
troublesome during use.
The unit should be mounted so that it is flat when you look straight, and the cable
exits either in front or at the back. To ease installation, you can attach it to a cap,
or directly fix it to your video goggles. That way you won’t have to think about it
again, and you’ll be able it to transfer it to another pilot easily.