User Manual

It can transfer the checked movement signals to transmitter, and the transmitter
can send out signals of head movement or position of head (on two axis). So that
the real synchronization can be realized when screen on the goggles displayed
video pictures, users can look around as if he were inside the RC model.
Since it is compatible with transmitters on nowadays market, it is easy and simple
to use it and grasp its best advantage is that no need any fixed reference object to
check and measure the inflection position of RC model.
No drift at all when it in stationary state compared with other facilities that need
to make use of very complicated reference facilities or manual controlled
transmitter, mechanical arms or other tools are heavy and not easy to be carried
along, it greatly limited users’ freedom.
Specifications:
1. Requirement for power-GYRO needs 8V to 12V DC power supply. Some
Transmitters, especially those FUTABA ones, can supply power directly by trainer
connector i.e.T9Z, FF9C.
Some transmitters cannot supply power to X-GYRO, i.e. 14MZ and 12FG.
The simplest solution is to use an extra battery for those RC transmitters. The
connector is already included in package.
2. Size: 25mmX35mm
3. Weight: 20g
4. Range for measuring: +-90 degree/second rotational speed movement.
Default Setting:
 Channels: X axis- channel 7 Y axis-channel 8
 Detective range：45 degree