User Manual

Reference for setting of Futaba transmitter （FF-9C for example）
 Futaba FF-9 C (and other high-end transmitters) can be used with X-GYRO.
Please select one channel Trainer menu, and leave it on, shut off other
channels. Notice: You can use either FUNC channel or NORM channel on
the menu, leave one of them on and it works with X-GYRO-1000. But FUNC
channel can let the transmitter input signal for mixing movement.
 Since the FUTABA transmitters especially the FF9/9C series trainer switch is
momentary switch, only if you leave it always “on” can realize its function.
The simplest way for it is to hold the switch on with a rubber band. Other
high-end transmitters such as T9Z, T14MZ have already put the trainer
channel to always “on” Channel