User Manual

Option 3:
Angles for tracking head movement on X axis----3 blinks of high brightness.
One blink with low brightness indicates the angle of 45° for tracking.
Two blinks with low brightness indicate the angle of 90° for tracking
Three blinks with low brightness indicate the angle of 180° for tracking.
Four blinks of low brightness indicate the angle of 360° for tracking.
Option 4:
It is 4-blink with high brightness for tracking angles of head movement on Y axis
(tilt axis), the options is same as the above.
One blink with low brightness indicates the angle of 45° for tracking.
Two blinks with low brightness indicate the angle of 90° for tracking.
Three blinks with low brightness indicate the angle of 180° for tracking.
Four blinks of low brightness indicate the angle of 360° for tracking.
Option 5:
X axis (pan axis) reversed---5 blinks with high brightness.
One blink with low brightness indicates normal.
Two blinks with low brightness indicate reversed.
Option 6:
Y axis (Tilt axis) reversed--- 6 blinks with high brightness.
One blink with low brightness indicates normal.
Two blinks with low brightness indicate reversed.
Option 6:
Go default setting--- 7 blinks with high brightness
Default X axis is for up and down, Y axis is for right and left.
Long process: over 2 sec. Short process: less than 1 sec.