User Manual

Dual Receiver Switch (Wireless Buddy Box System) Manual
Overview
ASSAN Dual Receiver Switch also called as
Wireless Buddy Box System. It’s with 7
channels available out to operate, allow one
radio with 2 receivers or two radios control two
receivers at one R/C model.
This item with smart design and small size,
easy to install and flexible in using. Dual
Receiver Switch with variety applications which depend on the pilots fined the way.
Features:
- Works with any radio system, such as Spektrum, FASST, X8, any other brand 2.4GHz,
PCM, PPM, FM, AM, etc
- Compact size and light weight
- Easy to use and Flexible application
How to use:
On the board there have two receivers connector, one
is Master, and another is Slave.
In Master Receiver connector, there have 8 channels
port, 7 channels for servos out and one channel for
Master/Slave order control.
In slave Receiver connector, there have 7 channels
only, all for servo out. That means the Dual Receiver
Switch with 7chs deliver max and at this situation, your
Master radio must have 8chs at least.
With Master radio, the operator has ability to decide which receiver (Master receiver or
Slave receiver) send the control signals to the connected servos and control model.
Wire Connected Way:
Please pay attention, in our sticker there haven’t CH1, CH2 ….etc like normal way. There
list as CH A,B,C….etc. Why as that? That is because this is Dual Receiver Switch, it’s
controlled by two different receivers, in two receivers, and the port may be different. You
just need remember Receiver’s “A” in and Servo’s “A” out,”B” in must out form CH “B” etc.
Master Receiver’s CH”A” not same as Slave Receiver’s CH”A”.