User Manual

32
Forexample:formappingtheleftandrightdirectionaxisofjoystick
tochannel1,
 1.Clickoption1toenterjoystickdisplaysub-menu.Pullthejoystick
leftwardsandrightwards,thenwecanfindtheindicatingrodforRX
axisisalsomovingleftwardandrightwards.Thenthenameoftheaxis
ofthejoystickisRX. 
2. Select“RX”foroption2; 
3. Select“CH1”foroption3;
4. ThentheRXaxisofthejoystickissuccessfullymappedtoCH1.

4.17 CanceltheMappingoftheaxisofJoystick
 Thesystemalreadymappedallthelinearaxisofthejoystickto
channels.Butsometimes,wewanttousebuttontocontrolthese
channels,forexample,mappingathree-segmentswitchwitha
channel.Then,wehavetocancelpreviousmappingforaxis.
Thewaytocancelthemappingforaxisofthejoystickisasfollows:
(assumption:cancelthemappingbetweenRXaxisandCH6) 
z Select“RX”foroption2
z Select“CH13”foroption3(i.e.,themaximumchannelnumber
+1). 
