User Manual

20
2.PPMmode:theSBUSportofthereceiveroutput theNo.1PPM
channel,andCH12portoutputtheNo.2PPMchannel.EachPPM
channelcontainseightsignalchannels.

●Howtoswitchthemodeofreceiver:
1.Judgethecurrentmodeofthereceiverwithusingfollowingmethod:
re-electrifythereceiver,thentheindicatorlightslowlyflashesfor
threetimes,suggestingthatthereceiverisworkingonPWMmode;if
theindicatorlightslowlyflashesforfourtimes,itsuggeststhatthe
receiverisworkingonPPMmode.
2.IfthecurrentcodeisPPM,thewaytoswitchtoPWMmodeisas
following:re-electrifythereceiver,thenpress“Reset”buttonfor
threetimesquickly.Iftheindicatorlightquicklyflashesforseveral
times,thatmeanstheswitchissuccessful.
3.Poweroffthereceiver,thenre-electrifyit.Iftheindicatorlightflashes
forthreetimes,thatmeansswitchingtoPWMissuccessful.
4.ThewayforswitchingPWMmodetoPPMmodeisthesameasabove
operations.