Winch servo

IRSA Supported 65 Class Rules August 2018 12
(d) Except where achieved by mechanical systems, automated
control of rig and/or sails and automated steering and/or
navigation are prohibited.
(e) On board camera(s) and/or the use of images from any source
while racing are prohibited.
(f) Except for the establishment and maintenance of a radio control
link, control unit positioning information, signal strength, and
battery status information, radio transmissions from the boat
while racing are prohibited.
(g) During an event, remote control and related equipment:
(1) if temporarily removed, shall be refitted in the same position;
(2) if replaced, shall be replaced by equipment of similar weight.
Section D Hull
D.1 GENERAL
D.1.1 RULES
The hull shall comply with the current class rules.
D.2 HULL
D.2.1 DECK LIMIT MARKS
A deck limit mark for each sail group used at an event shall be
displayed on the hull centreline near to the relevant mast position.
Each limit mark shall be a minimum of 5 mm in diameter.
D.2.2 MATERIALS
(a) Except in remote control equipment, the density of material shall
not exceed that of lead (11,340 kg/m
3
).
(b) The forward 4 mm shall be of elastomeric material.
(c) The elastomeric material in D.2.2(b) shall be a minimum of
3 mm wide at one point.
D.2.3 CONSTRUCTION
(a) The hull shall be a monohull.
(b) Except for the trunking for hull appendages, the hull shall not