User Manual

12 / 14
Set the serial interface baud rate

GPS Band rate Setting

Click OK，select GPS Band rate in the menu , select the baud-rate for GPS in list , typical
GPS baud rate is 4800 or 9600 and 19200

Mavlink Band rate Setting

Click OK，select Mavlink Band rate in the menu， select the baud-rate for flight
controller's Mavlink protocol in list , typical Mavlink protocol baud rate is 57600

PC Bandrate Setting

Click OK, select PC Bandrate in the menu , select the baudrate for PC debug in list , typical
PC debug baudrate is 57600

Skysight Bandrate Setting

Click OK, select Skysight Bandrate in the menu , select the baud rate for Skysight flight
control in list , typical Skysight flight controller baudrate is 57600
IMU Selftest

When use built-in 10-axis AHRS IMU, you need to do built-in IMU Selftest for the first time
use or after restoring the factory settings and the flight place is changed

Select IMU Selftest in the menu and press the OK , Selftest will begin after 10 seconds,
please hold in a quiescent state