User Manual

六. Battery type and low voltage detective values:
SPECIAL INSTRUCTION: The discharged battery should be connected, when customers set to the low voltage.(The battery
voltage value will be record as the low voltage detection value, and then do not need to set the type of battery)
LOW VOLTAGE ALARMING: When the voltage is lower than the lowest setting voltage, all the LED will flash together and
then LED will not be controlled by the remote control and keys. If AUX2 set as buzzer port and connect to the buzzer, then the
buzzer will alarm when the voltage is over low
WARNING: 1. The over high current may damage or shorten the lifespan of the LED
2. We recommend to use a 3A/UBEC at least if select the high power option.
INSTRUCTION:
[3]
POWER LOW
MIDDLE HIGH
OUTPUT CURRENT
40mA 80mA 160mA
LED 2pcs 4pcs 8pcs
Battery Type
Low Voltage Detect
LiPo 2S LiPo 3S LiFe Po 2S LiFe Po 3S
Low
6.2V
9.3V
4.2V
6.3V
Middle
High
User define
6.8V
7.6V
10.2V
11.4V
5.0V
5.4V
7.5V
8.1V