User Manual

[1]
Thank you for purchasing our product which is one of the most advanced item in R/C market. The flashing mode, simulated turn
signal, backward light, break light can bring you real driving fun. It is easy to assemble and operate, it is the best choice of most
of the R/C car amateurs. To reach your ideal effect, please read the instruction manual carefully. We believe your car will be a
beautiful scene on your track with our product.
一. Product function:
1. The simulated mode and the 7 flashing modes can be changed with the sub-board.
2. Low voltage detection.
3. Apply to all kinds of large trucks and cars.
二. Product list:
1. Main board*1(install on the car body).
2. Sub-board *1(install on the chassis).
3. Main cable *1(connect the main board and sub-board).
4. Balance Cable *1(connect 2s battery).
5. Buzzer cable *1(the port is AUX2,need to set when use it).
6. 5mm white light x3 、5mm red light x1、 3mm white light x2 、3mm yellow light x2.
7. Instruction x1pc.
三. Product specification:
1. Input voltage：5V
2. Max working current：800mA
3. Cable length：50cm
4. Dimension: Main board 35*31mm sub-board 23*15mm
5. Weight: 70g