User Manual

Hobby King Apache OSD User Manual
1 Hardware Connection：
A Port Group A：
1.1 Audio/Video Port：
It’s for connecting the camera.
1.2 GPS/USB Module Port：
It’s for connecting GPS module or USB data module, but they cannot connect to
the main board meantime.
1. 4 Other Sensor Module Ports：
We supply four couples of ports for connecting the
other OSD modules, they have the same function: Any port
can connect to our other supplied modules.. OSD main
board can automatically detect the module type.
1. 5 OSD Power Module Port：
It’s a must part for AEO OSD, it must be connected to supply power to all the OSD parts, and meantime it
can sensor the real current Amps and Volt. of the power battery.
B Port Group B：
1.6 Aux. Voltage Detection Port：
There’re two modes for this port.
When it’s set auxiliary voltage detection mode, pls use the cables in Figure
1.12 to connect and measure the power. For example, video transmitter and
camera usually use the male JST to supply power.
When it’s set RSSI mode, connect receiver RSSI output to this port, pls no-
tice the red is positive and black is negative.
Other Ports
TF Card Slot
Slot the TF can record the flight data. The TF card supports max.8GB.
The card has to be pre-formatted with FAT32 before using..
2．OSD In-flight Interface Screen & Setting Menu：
Entire Contents © Copyright 2011 1 V1.03