User Manual

4.2 Before Taking-Off! 19
4.3 After Taking-Off! 19
4.4 After Landed! 19
5, PC Configuration Software! 20
5.1 USB Data Module Driver Installation! 20
5.1.1 Pre-Installation Preparation! 20
5.1.2 Installation Steps! 20
5.2 Hardware Connection! 22
5.3 Software Interface Introduction! 22
5.3.1 COM Port Setting! 22
5.3.2 OSD Main Board Information! 22
5.3.3 OSD In-Flight Interface Screen Monitor! 23
5.4 OSD Main Board Firmware Update! 23
5.5 General Setting! 24
5.5.1 Power Battery Gauge Settings! 24
5.5.2 OSD Video Display Settings! 25
5.5.3 In-Flight Interface Options! 25
5.5.4 Timer Trigger Options! 26
5.5.5 Home Distance Mode Setting! 26
5.5.6 Unit Setting! 26
5.5.7 GPS Time Zone Setting! 26
5.5.8 Power Battery Sensor Calibration! 26
5.5.9 Flight Recorder On/ Off Switch! 26
5.6 Auxiliary Port Option! 26
5.6.1 Auxiliary Port Mode Setting! 27
5.6.2 Auxiliary Port Voltage Calibration! 28
5.6.3 RSSI Signal Voltage Range Setting! 28
5.6.4 Video Battery Low Voltage Warning Setting! 28
6, FAQs! 29
6.1 Hardware Connection! 29
6.2 OSD display! 29
6.3 Software Operation! 29
AEO TECHNOLOGY www.aeorc.cn
Entire Contents © Copyright 2010 4 V1.03