User Manual

5.5.2 OSD Video Display Settings

The OSD information display on the screen can be adjusted by the three setting options

here. The horizontal offset, vertical offset and the contrast tuning can be performed as the

same as the OSD Video Display Setting described in the section 3.4.2.

5.5.3 In-Flight Interface Options

The In-Flight Interface Options is not available in the On-Screen-Display Conﬁguration

Menu. They set the outlook of On-Screen-Display In-Flight Interface Screen as per shown

in Figure 5.10, Figure 5.11 and Figure 5.12. There are three options here. The Horizontal

Datum at the centre of the screen can be shown if “Horizontal Datum” is checked. The

“Centre Home Indication” check box decides the display position of Home Direction as

described in section 2.4.3, Maximum Altitude Reached as described in section 2.4.7 and

Distance to Home as described in section 2.4.8. If it is un-checked, the above three items

will be shown on the top-right corner on the On-Screen-Display In-Flight Interface Screen.

If it is checked, the Home Direction will be appear in the centre, and the reading of

Maximum Altitude Reached and Distance to Home will be shown in the upper-left

reference to the Altitude Scale. In the same time, the “Horizontal Datum” will be disabled

automatically to avoid interruption of the Home Direction indication. Lastly, the Altitude

Scale described in section 2.4.5 and Speed Scale described in 2.4.9 can be hidden by

checking the “Hide Scale” as per Figure 5.12.

AEO TECHNOLOGY www.aeorc.cn