User Manual
Lets get started
Connect IGGY as shown above.
IGGY ‘s microprocessor draws it’s power from your receiver and
is only in awake state while your receiver is switched on. Switch-
ing o power to your receiver will put IGGY to sleep and kill the
ignion.
IGGY does not need to be connected to the Ignion/glow baery
for system set up so it is recommended to connect only to your
model’s receiver for setup.
4
Baery input
Baery input
To Ignion
To Ignion
Connecon to
Receiver Channel
Lead Connecon Examples for IGGY.