User Manual

Congratulaons for choosing the Booma RC Ignion (Iggy) Switch.
IGGY is the result of 24 months of design and tesng and was
designed for giant scale RC enthusiasts by a giant scale RC enthu-
siast. IGGY is the world’s rst 3 stage fail safe ignion switch in a
compact, light weight, aracve and aordable package.
Before you install IGGY please take the me to read
these instrucons. A few simple steps will have you
successfully using this advanced product in no me at
all.
IGGY Features:
- Microprocessor control - of Opcal Isolated digital switching circuit.
- Fail Safe Switching - follows fail safe switching of receiver setup.
- High Bright Blue LED - for easy daylight viewing.
- 3 Stage Arming - for complete monitoring of potenal live ignion.
- 3 Stage Emergency Ignion Kill -
By front panel switch.
By transmier signal.
By switching o power to the receiver.
- Remote Ignion Kill - via transmier.
- Receiver Power connected Indicaon - via LED ashing indicaon.
- Micro-Power design less than 1uA in standby mode. Less drain on your
model’s ignion baery than baery leakage so you can leave IGGY con-
nected to the ignion baery permanently.
- Baery Input Voltage 1v to 60v.
- Can also be used as an “On-board” Glow Driver.
- Weight 17 grams.
- Dimensions 36mm x 17mm (1.41 x 0.66 inches).
2