User Manual

MODE 6: Button trigger cascade working mode
Connection diagram as the following, this is a creative trigger way of GENERAL USE GLOW PLUG DRIVER, through
which 1 to N pieces of GENERAL USE GLOW PLUG DRIVER can work at the same time. Under this working mode,
only module 1 needs to connect the trigger button, all the other modules don’t need a trigger button but parallel con-
nected all the remote control cables. Short press button one time, the indicator LED light flashes, after 5 seconds’ time
lag, all the modules will be on full power output for 30 seconds and this working mode is similar with working mode 1.
MODE 6