User Manual

● Altitude -- displays until Home Pos is set, then it resets to zero
● Time (UTC) -- does not display
● Date -- does not display
● Bearing -- does not display
● Satellites -- displays count
● Fix or not - blinking or not blinking satellite icon
Home calculations:
● Distance to home - LOS (meters)
● Bearing to home -- does not display
● Altitude above home -- ALT (meters)
● Arrow pointing towards the Home Pos
● Auto set home position (Also manual) -- I don't know how or when it is auto se
I tested my flashed unit on 5/27/2013, 5/28/2013, and 5/29/2013 on a RC Rock Crawler and in
my car.
Operation:
● At initial power on:
● OSD unit LED blinks rapidly at first
● Voltage shows
● RSSI value shows - I understand it takes an RC Rx capable of this
● Timer starts "00:00" (minutes and seconds)
● Home direction circle shows spot in center
● Displays flashing "NO HOME POS" once per second
● Lat and long displays "--:--.----? --:--.----?"
● SPD shows "0"
● LOS shows "-"
● Line through home icon
● # satellites shows "-"
● Satellite icon is flashing once per second prior to satelitte lock
● ALT shows "0"
● OSD unit LED is blinking once per second
● Satellite locks:
● Even with "NO HOME POS" flashing, latitude, longitude and altitude are displayed
as soon as available