User Manual

8/6/2016 Manual[lazyzero.de]
http://lazyzero.de/en/modellbau/kkmulticopterflashtool/manual 2/6
An Internet connection is required if you want to use the repository. Upon launching the
KKMulticoper Flash Toll the descriptive le of the repository with all informations will be
downloaded.
Installation
On Windows or Linux
You just have to un-zip the archive you downloaded to any folder you like.
Mac OS X
Just open the dmg-image and move the kkMulticopter Flash Tool to the Applications folder.
Run the ash tool
To start the tool use the run script dedicated for your OS ().
kkMulticopterFlashTool_32.exe 32 bit Windows programm or
kkMulticopterFlashTool_64.exe 64 bit Windows programm.
kkMulticopterFlashTool_32.sh Linux bash script for 32-bit systems or
kkMulticopterFlashTool_64.sh Linux bash script for 64-bit systems
The kkMulticopter Flash Tool Mac OS () App
Boot 32 bit mode
or run application in 32 bit mode
Do not run the Java executable as the tool will not work properly.
After starting the tool you may get a dialog that there is a new version. Press the download
button to leave the tool and it will open the download page of the tool in your default
browser. Or you can select cancel to get to the tool.
The Menu
Settings
The setting menu has three functions:
1. select if you like to work oṬine. No Internet connection will be needed. This will
speed up the start of the KKMulticopter Flash Tool because it will not need to wait
until the network times-out. A drawback is that you may only ash the rmwares
already downloaded from the repository.