User Manual

This document was written by Chris Hansen.
For more information, or to purchase the products shown here, please visit our web site:
www.hansenhobbies.com
Stripping Wire:
I prefer the type of wire stripper with several size teeth in a row. This is the type we sell on our website. The reason I like it (besides having
used this kind all my life) is that you can quickly strip servo wire with it. It isn’t meant to be used like this, but I find this method works great:
1) First separate the wires using the cutting part of the jaw as shown.
2) Position the wires in the first three teeth and close the jaws.
3) Flip the wire over and close the jaws again.
4) Pull away to remove the insulation
This method is extremely fast and gives even clean results. It may not work properly on all wire types, however. I use the first three teeth
when working with our Economy 24AWG wire and Deluxe 22AWG wire. You’ll have to experiment with different wire sizes to see what works
best.