User Manual

Begin
to Use
The
New ESC:
Before
using the new ESC
please
carefully
check for every
connections are correct
or
not.
*
Connected with Sensored Brushless
motor
When using the HobbyKing
Sensored Brushless motor,
the Blue motor wire A,
Yellow motor wire
B
and Orange motor wire C of the ESC must
connect with the
Sensored motor wire A,B,C
respectively. ït is necessary to connect
the Sensor wire
to the
"Sensor"
socket
on the ESC. Don't
change the wires
sequence optionally.
*
Connected with Sensorless Brushless
motor
When
using the HobbyKing Sensorless Brushless
motor, the Blue motor wire
A
,
Yellow motor
wlre
B and Orange motor wire
C of
the ESC
can be connected
with the motor freely.
If the motor runs
in the
opposite derection,
please
swap any two wire
connections,
*
Connect
the ESC signal wire to the Receiver
Black wire RX-
Red wire RX+6.0V
White wire RX-Signal
ESC'S indicating
LEDsi
Conversion of Sensored and Sensorless
function
*
When Power wires
on the ESC are connected with
the battery
pack,
the
ESC can automatically
identify
the motor type
(Sensored/Sensorless)
via indicated
LED.
*lf
the ESC works
at the status of Sensored, remove
the Sensor wire,
the ESC
can be
automatically
change to the status of
Sensorless.
-2-