User Manual

Program
method
The HobbyKing
Program
card is
used to
make all
adjustments
to the
active
profile
in
your
ESc.
Using Program
card
1. The
HobbyKing
Program
card
with LED
dlsplay
is easy
to use and convenient
to
carry. All of
the
programmable
functions
are
shown
on the
program
card.
2. Turn
on
the ESc.
Remove
the signal
wire
and
plug
it into the
top-socket
on the
program
card,
wait for
2 seconds
until
the LED is
ON.
The flrst
programmable
function
will
be shown,
if an
error occurs,
please
reconnect
them.
3. If
ESC is not
connected
with
the batteries,
the Program
card
should be
connected
with
other
power
supply,
the range
of
power
supply
is within
5.0-6.3V
4'
Press
the button
" Menu"
on
the
program
card and
circularly
select
each
programmable
function.
At that
time
the number
of the
programmable
function
will be
displayed
on the
left
ot the
LED,
the current
value
will
be displayed
on
the right. Then
press
the
button value
to
change
the value
and
press
the
button
OK to
confirm. At
the same
time
the Red
indicating
LEDS
of both
program
card and
the
ESC blink.
Turn
offthe ESC,
the modified
settings
will be
saved in
the ESC'S
memory.
5.
Press
the button
Reset
to restore
the
default
settings.