User Manual

A better Landing Gear for SLOW - STICK

Thats me!

My name is Juergen Enders, and I live in Germany.

My age: 59

I am running the RC hobby for over 45 years

I want to introduce my improvement of the landing gear you today.

Take the carbon rod and go to a DIY store and buys you a standard aluminum parts of structures.

I bought it in Germany in Bauhaus for 5 €. I think you also get something in your country.

Look at the pictures and drawings.

PAGE 1
A better Landing Gear for SLOW - STICK Thats me! My name is Juergen Enders, and I live in Germany. My age: 59 I am running the RC hobby for over 45 years I want to introduce my improvement of the landing gear you today. Take the carbon rod and go to a DIY store and buys you a standard aluminum parts of structures. I bought it in Germany in Bauhaus for 5 €. I think you also get something in your country. Look at the pictures and drawings.
PAGE 2
I bought this and this I did.
PAGE 3
Place the small U-shaped top and drill a hole. It fits right on the bar. After insert the screw through mount plate distance to plastic.
PAGE 4
Placing the landing gear. Place the larger part above. It now slides over the smaller part. I have taken a 2-mm screw, so as not to weaken the rod.
PAGE 5
So all looks ready. Now I have no more remember that the plastic breaks down at a slightly harder landing. Should you replicate this, I wish you much success. I hope I could sometimes make a contribution, and not just live off others in the internet. On the next page you will find technical drawings, but remember that all dimensions are in mm. In Germany they say among the model fliers "spar and rib fracture" before we flight for the first time with a new model.
PAGE 6
PAGE 7
PAGE 8