User Manual

Charging Function after insert adapters, chargers "drop" sound, the display shows ;
Insert the battery charger "drip - drip" twice to start charging. Display cycles through each section
total battery voltage and the battery voltage;
After the battery is fully charged, the charger automatically stops charging, the display shows
And flashing, buzzer once every five seconds.
Voltage Display Function Insert the battery (without connecting adapter), the total cycle battery
voltage and the voltage of each cell on the display
Error code When the charger detects an error, stop charging, the display shows an error code,
buzzer alarm, reconnect back to work after the adapter.
SPECIFICATIONS
Operating Voltage Range 9V-16V DC
Operating Temperature
-20 - 45
℃
Cells Type Supported 2-4 cells Li- Ion/Li-Poly
Input Power Request recommend ≥ 30W
Max Charge Power 25W
Charge Current 1500mA
Charge Accuracy ±10mV
Balance Current 1000mA
Display Accuracy ±10mV
Weight 76g
Dimensions 81*50*20mm (L*W*H)
Charger
Internal
Error
Wall adapter is giving over or under current
One or more cells are damaged on the battery