Brushless Car ESC 45A w/ Rever

Manual of Quik Series Sensorless Brushless Motor Speed Controller
5
Adopting 2x16 point LCD panel, program card can make all setting conveniently and directly.
The keys function
KEY WR
FUNCTION
To move the
cursor
horizontally
To move the cursor vertically
and change item or item
value
To confirm selected item
or item value.
To write and save setting
parameter to ESC
Program procedure
1. Unplug the battery of ESC and connect the PPM wire to program card properly.
2. Connect the battery to ESC, program card will read the parameter from ESC and display on LCD panel.
3. Push to select programmable items and push to enter the item.
4. Use key to move the cursor to proper place ( if it need ), use to select or change item value (programmable Value ) and
push to confirm.
5. When all setting is finished, push WR to save to ESC. After that, you can push to check updated parameter.
Parameter Display
Item Specification Option or value Default
1.OffVolt=
Low Voltage Protection Threshold 00.0V 49.9V
00.0V
2. BrakeForc:
Brake Force 50%,75%,100 100
3. DragBrake:
Drag Brake 0,5%,10%,15%,20%
0
4. RunMode:
Run Mode One, Two, Two2
Two2
5. StartForc:
Start Force 20%,25%,30%,35%,40%
30%
6. Timing:
Timing low, middle ,high and highest
middle
7.NeutRange:
the neutral range of throttle 6%,8%,10%
8%,
8. InitBrake:
Initial Brake Force 5%,10%,20%,30%.
5%
9. ReverForc:
Reverse Force 25%,50%,75%,100%.
50%